Modern Day Equivalent of Byte/Compute! Magazine? 327
MochaMan writes "I grew up in the '80s on a steady diet of Byte and Compute! magazines, banging in page after page of code line by line, and figuring out how sound, graphics, and input devices worked along the way. Since then, the personal computer market has obviously moved away from hobbyists intent on coding and understanding their machines down to the hardware, but I imagine there must still be a market for similar do-it-yourself articles. Perhaps the collective minds of Slashdot can divine some online sources of fun and educational mini-projects like 'write your own assembler' or 'roll your own bootloader.'"
Circuit Cellar (Score:5, Informative)
A fantastic hobbyist type magazine. Our community college has a student subscription for it, definitely worth it. Edited by Steve Circia, name should ring a bell!!
Re:Circuit Cellar (Score:5, Informative)
Yep that was number one on my list. You might want to add Nuts and Volts as well. :(
Oh and the entire internet for software.
I really miss Byte
Oh and this as well http://www.chaosmanorreviews.com/ [chaosmanorreviews.com]
Re:Circuit Cellar (Score:5, Informative)
Re:Circuit Cellar (Score:5, Funny)
Am I the only still buying copies of 2600? [2600.com]
Am I the only leaving words out of my sentences?
Oh, I not.
Re:Circuit Cellar (Score:4, Funny)
Am I the only still buying copies of 2600? [2600.com]
Am I the only leaving words out of my sentences?
Oh, I not.
I've never left a word out one of your sentences in my life!
Re: (Score:3, Insightful)
Another 2600 fan here, but their focus is primary on the legal and pseudo-legal entanglements of modern technology. Sure, they print a handful of hopelessly outdated how-tos on wifi sniffing and general BOFH pleasantries, but the bulk of it is now a socio-political journal. Not so much a tech zine anymore...
Re: (Score:3, Informative)
Re:Circuit Cellar (Score:5, Interesting)
You missed a lot of pain in my opinion.
I remember spending several days typing-in RUN Magazine's "error checking" program into my C64. It ran perfectly. And then several more days typing boring hexadecimal code into that compiler, expecting to get a free word processor called RUNscript. Well the error-checking program said I had typed flawlessly, but the RUNscript still didn't work. So I waited 3 weeks for the next magazine (a long time in the life of a 13 year old), and looked diligently for typos and there were some listed in the "Ooops" column.
So I had to type in the WHOLE project another time. Several more days of my life. And it was still broke! I then reached into my measly allowance and paid $15 to get the so-called "free" RUNscript word processor on a floppy. As it turned-out it was a worthwhile investment since I used it another 2 years to do homework, until I eventually got the Mac-like GEOS system.
I learned two valuable lessons:
(1) It's easier to BUY programs than to type them in yourself (and then have them not work).
(2) Debugging hexadecimal is a bitch.
Re:Circuit Cellar (Score:5, Interesting)
Regarding keying in the programs in binary, I thought that defeated one of the fundamental premises of publishing programs in magazines, which was to gain an appreciation for and learn programming, and have the ability to modify and improve the software. I learned to program when I was 10 years old by typing in COMPUTE! magazine's BASIC programs into my TI-99/4A. I couldn't even save them until we could afford a cassette recorder, so afterward I would leave my computer on for days until I tired of that program (and I think I actually shed tears over power outages more than once). I feel that is why I am a software developer today. I learned an appreciation for the power I could exert over a computer, and the nearly infinite possibilities of what could be achieved through that.
Now if I was typing in nothing but arrays of thousands of numbers, I wouldn't have learned anything. In fact I actively avoided TI programs that consisted of nothing but DATA statements of numbers.
Re:Circuit Cellar (Score:4, Informative)
Absolutely correct. I rarely post or reply here, but I lunged at this one. Very gratifying to see you beat me to it.
To give you an idea, the latest issue of this magazine includes a quaternion-based combined accelerometer/magnetometer/gyroscope navigation system for unmanned aerial vehicles-- and it's pretty good. There's also a good summary of cool new and emerging parts, and fairly often some high-profile design contests that are absolutely accessible to hobbyists.
And yes, you'll occasionally see source code listings. Though the website is used thoroughly as well.
I write embedded software for a living, and let me tell you, if you want to get back to that 1980s feel of knocking out your own computer just because you can, then hacking around to see what you can pull off with it, modern microcontrollers are awesome, and they are cheap, cheap, cheap. Add to that the cheap fab 'n' slab shops that not just print PCBs but will populate them with your parts, and you're off and running even if your soldering dexterity sucks.
Also, I would say that "Make" has its place, and that is getting people to be creative comfortably within their skill space. The long term strategic goal for that magazine is probably as an easy entry point to get people back into a mindset where they realize that they can, in fact, build things themselves. I consider that goal strategically important for the global economy, as well as the Bright Shiny Future.
But "Circuit Cellar" ("Circuit Cellar Ink" if you want to go back a bit) is an excellent thing to read and hack around with. Sometimes just seeing what other people have managed to pull off is half the fun. Much of that stuff finds its way into real-world applications, just like "Byte" and "Dr. Dobb's Journal" once trained an armada of people who changed the world (thank you, Michael Abrash).
Best wishes and happy hacking,
Matt Heck
Senior Software Engineer, ECast, Inc.
Former Director of Special Projects, TechShop, LLC
Make (Score:5, Informative)
From O'Reilly is about the only one which I can think of.
Re:Make (Score:5, Interesting)
There's still always 2600, as limited as its scope is...
Re: (Score:2)
Unfortunately, yes. They have some awesome news on really cool projects people made, but these are usually shallow news articles - a few photos, some lines, no in-depth, no instruction, no deep how-it-works. That is combined with in-depth instructables on very simple and easy projects - stuff anyone can do (or buy from "Maker Shed"). Don't get me wrong - some of the simple, easy projects are quite interesting (like making plastic from curdled milk), but all are on "low difficulty" and most are quite patheti
Re: (Score:2)
In corporatist China, milk is made from plastic!!!! [bbc.co.uk]
Re:Make (Score:5, Interesting)
Wow... I'm going to disagree with you in a big way. The current issue (Make 22) has an in-depth article on converting your lawnmower to RC control. Circuit boards, wiring, assembly... it's a big project but with LOTS of good info to get you there. NOT an overview or a news article. The same is true for the article on hacking wireless power outlets. Then there is the Arduino-powered tweeting cat toy. The physics and construction of double pendulums. How about a sun tracker for solar projects?
There's a ridiculous amount of great material in that single issue! Not news articles but full, in-depth how-to's. There are some light mods (to borrow your phrase) as well, but many of the projects require a significant investment of time and energy.
I think Make is a great source for projects. No dumbing down that I see, at least not in the latest issue!
Re:Make (Score:5, Insightful)
This is really disappointing to me as well. I've been a subscriber since its inception, but I'm about to let it drop. I know which end of a soldering gun to hold. I don't have a desire to add a toggle switch to a toy to impress hipsters.
Where are the articles like:
- Build a high quality mass spectrometer (http://old.4hv.org/index.php?board=4;action=display;threadid=1268)
- Convert a cheap Chinese milling machine to CNC (http://www.hossmachine.info/)
- Build a Tesla Turbine and reap geothermal energy.
It went from being "Make useful stuff" to "Make crap to impress dumb people"
Re:Make (Score:5, Interesting)
Are you serious? Make is crap! Once a month, you'll get an article about actually MAKING something. Other then that, it's 50 articles about knitting bicycle seats or turning a nerf gun "steampunk". Make has become nothing more then hipster fashion.
Re: (Score:3, Informative)
The Internet is this magazine. (Score:5, Insightful)
The Internet is this magazine.
Re: (Score:3, Insightful)
Pretty much. In addition to Compute's Gazette I also read RUN (for C64) and AmigaWorld (sister magazine). They were great for learning programming & hardware, but have no place in today's world that is aimed at the simplified "turn key; start engine" mindset.
Similarly the science fiction magazines I used to read also faded away. Asimov's and Analog are still here but rapidly dwindling in circulation. I guess just as you can't go back to the 1920s when you'd read dime-store comics, and eat penny c
Re:The Internet is this magazine. (Score:5, Interesting)
You need to look into websites, there is no magazine that captures the zeitgeist of the personal computer industry today:
http://www.arstechnica.com/ [arstechnica.com]
http://www.lifehacker.com/ [lifehacker.com]
http://www.tomshardware.com/ [tomshardware.com]
then there are specialty sites that focus on very particular topics, but those are some good, general sites to start with...
To get your John C. Dvorak fill, you could go here:
http://www.dvorak.org/blog/ [dvorak.org]
And Jerry Pournelle is here:
http://www.chaosmanorreviews.com/ [chaosmanorreviews.com]
Hope that helps
Re: (Score:2)
I take exception to that... (Score:3, Informative)
Re: (Score:2)
anandtech ? the tech report ? silentpcreview ?
Re:The Internet is this magazine. (Score:5, Interesting)
Ars' Science section is great but aside from the longer technical articles, such as Siracusa's OS X reviews, I get the sense that more and more of their writers are wannabe geeks that like to write about technology but aren't real geeks themselves.
Lifehacker? Hahaha. Sorry, but I can't take a site whose 30 something founder just put together her first desktop from parts LAST YEAR as a serious tech head's site. Again, this site is about being a fan of geek/nerddom but isn't really run by real geeks and nerds. Take Lifehacker and then take a look at Hackaday. One is a hipster fansite for hacker wannabes and the other actually shows you how to do interesting hacks.
TomsHardware, don't have any opinion.
Jerry Pournelle is the shit.
John C. Dvorak IS shit.
Re: (Score:3, Informative)
Another one:
http://www.phrack.org/ [phrack.org]
Re: (Score:2)
The last few unfortunate years of its existence aside, BYTE was the best computer magazine then or since. As has been said, something like the Scientific American of the computer world in its time. Unparalleled exposition about the latest trends in computer design, programming languages, etc. Plus in depth reviews actually worth reading. Outstanding columnists, etc. Virtually every issue from the 1980s is a gem.
Re: (Score:2)
Through mid-1985, I'd have to agree. Beyond that, BYTE suffered the same fate as Creative Computing, getting watered down to be more general as both were used to fulfill remaining subscriptions of more narrowly-focused magazines like Compute! Gazette and the like as they failed. I was unfortunate enough to buy a 2-year BYTE subscription in early '85, so I saw its decline first-hand.
Re: (Score:3, Funny)
Rupert Murdoch will be glad to sell you a subscription.
Face-man's gonna have to bust him out first.
Yes, its called the internet (Score:2)
That said check Make or google micro-controller projects.
Make Magazine (Score:3, Informative)
Make magazine is a wonderful DIY with electronics projects etc.
Re: (Score:2)
Unfortunately it's rather on the "shallow water" side. It has articles talking about some awesome and hard ideas, and it has DIY instructables on simple, easy things. It doesn't have in-depth instructables on difficult, ambitious, big projects though. News on really interesting projects and instructions/tutorials on simple ones. "Popular audience". Though some of their simple projects are ingenious in their simplicity too.
Re:Make Magazine (Score:4, Insightful)
Make is to DIY what Wired is to technology ...
Re: (Score:2)
Make is to DIY what Wired is to technology ...
Exactly.
Re: (Score:2)
Re: (Score:3, Informative)
So, in other words, entering an already-created industry and blowing away the competition for years and years and years, with tons of so-called "killers" falling by the wayside year after year?
I like this one... (Score:5, Informative)
Try looking at http://www.nutsvolts.com/. It has electronic and some programming at very low level.
Re: (Score:2)
Sadly Nuts and Volts is dumbed down compared to the old Radio-Electronics mags. I let my subscription expire after only a year because it became too repetitive. Too much stuff about how to make LED's blink and the like. I don't think there is a good general electronics hobby mag anymore.
Re: (Score:2)
I don't think there is a good general electronics hobby mag anymore.
Perhaps not, but there's still Instructables. [instructables.com]
Maximum PC (Score:4, Informative)
Re:Maximum PC (Score:5, Insightful)
Maximum PC is to 80s Byte/Computer as microwaved Ramen Noodles are to a Home-Cooked, Four Course Meal.
Maxim PC (Score:3, Funny)
Re: (Score:2)
Maximum PC is a great magazine.
Maximum PC died when they changed their name from "boot!".
Comment removed (Score:5, Interesting)
Re: (Score:2)
I can't believe that everyone seems to have forgotten to mention that the internet has made this type of tree killing obsolete.
Many orders of magnitude more stuff available online, dealing with any subject imaginable.
The only thing this won't help you with is toilet reading, unless you are hardcore enough to wifi from the bathroom.
Re:It's called "The Internet" (Score:5, Informative)
You must be very young. I can remember when even Computer Shopper had some decent technical articles. I learned a lot from it.
I can also remember when there were multiple magazines about anything technical. From computers to hotrodding you could find a lot of very technical how-to projects that took months for the magazine to complete. Every aspect of the project was gone over in great detail, unlike the vast majority of what you find on the internet today that is very, very cursory information. Back in the day a good article on hotrodding would tell you how to cc and modify the cylinder head combustion chambers to provide even power from all cylinders in your engine, or tell you how to completely rebuild and strengthen the transmission or rear differential in your car, or how to build drive train from beginning to end to get the most performance and longevity out of it. The last type of article would teach you to understand cam lobe technology and how it affects the power band of your engine, how to match heads and intake manifold, to the cam. How to match compression ratio to all of that, and then how to match your clutch, transmission, and rear end to the engine. The amount of knowledge those magazines made available was incredible.
The old computer magazines were just as thorough in their approach to computing as the good hotrod magazines were to hotrodding. Even Radio Shack had a decent reputation for technical projects. Now they're nothing interesting at all. Thirty years ago you could buy almost anything you could think of in electronic components from them. They'd even sell you a build-from-scratch computer kit. Not the greatest computer in the world even for that time, but a great learning project. Nothing like it even exists today.
If you are intent on bit banging... (Score:3, Informative)
If you are intent on bit banging... the available options these days are pretty much limited to microcontrollers, unless you want to end up in huge projects or small modifications on huge projects.
Most of what you can do with these tends to be robotics projects, since there aren't a lot of 8-bit general purpose computers available out there any more.
There are a lot of web sites that provide small source code for special purpose robotics projects which you could apply much in the same way as typing in BASIC games from Compute! or Byte magazine, and then playing with them.
If your intent is to provide a project for a kid, you could do a lot worse than going some place like Weird Stuff, buying up a handful of Compute! magazines and a Commodore 64, a 1541 disk drive, and a box of 10 floppies. There are plenty of analog TV's out there still to use a monitors which are otherwise sitting unloved in peoples garages.
-- Terry
Re: (Score:2)
I'm an ECE, and know processors inside and out, however I don't have a clue as to how you go from circuit board to a screen. I want to know how you display images on a screen (probably best to start with an analog CRT for now). I also want to know how audio works as well. I had a C64 shortly after they first came out; I was old enough to tinker with it a bit, but too young where I coul
Re: (Score:2)
Now to dig into the specific workings of the chip. I think I found a starting point, unless there's something simpler. What I'd really like to know (for my project idea) is what the Atari 2600 used.
Re: (Score:3, Interesting)
The Atari VCS/2600 used a very simple chip called TIA. I forget the exact resolution but it's very low - about 50x25 - which is why it has such blocky graphics. It also has 2 sprites that create hi-res players and 2 "balls" which are used during play. It was designed with the intent of doing Pong-type games, but programmers discovered ways to create arcade games like Space Invaders or Missile Command as well. More here: http://en.wikipedia.org/wiki/Atari_TIA [wikipedia.org]
Jay Miner then moved from TIA to C-TIA for th
Re: (Score:3, Informative)
I picked-up a lot of knowledge from here: http://www.avsforum.com/ [avsforum.com]
And here which describes NTSC in great detail: http://www.videointerchange.com/pal_secam_conversions.htm [videointerchange.com]
And: http://nfggames.com/games/ntsc/colourresx.shtm [nfggames.com]
http://www.videouniversity.com/articles/video-recording-formats [videouniversity.com]
Re: (Score:3, Interesting)
I want to know how you display images on a screen (probably best to start with an analog CRT for now).
That depends on your aim. Driving an analogue CRT has almost nothing in common with driving a digital LCD. If you've got some kind of analogue output then you can plug in an oscilloscope and draw lines on it really easily. That's state of the art for computer graphics circa 1950ish. With something like a TV screen, it's relatively easy to generate a composite video signal. The display will handle the strobing, you just need to send the colour signals with the right timing and handle the sync correctly
Re: (Score:2)
I read your comment and I suspect you're not entirely aware of what bit banging is. From the wikipedia article [wikipedia.org]:
Bit-banging is a technique for serial communications using software instead of dedicated hardware. Software directly sets and samples the state of pins on the microcontroller, and is responsible for all parameters of the signal: timing, levels, synchronization, etc. In contrast to bit-banging, dedicated hardware (such as a modem, UART, or shift register) handles these parameters and provides a (buf
Don't dismiss microcontrollers (Score:3, Informative)
Pragmatic Programming is another great option (Score:3, Informative)
Arduino (Score:5, Informative)
Personally I prefer working with ATmega's directly rather than with Arduino, but ... if you want to futz around and LEARN, Arduino is a good place for it. Lots of tutorials and others willing to help. Lots of neat plugin boards for sensors IO. Lots of choices of example software from FreeRTOS to VGA output on a pin (both of those aren't designed for the arduino framework, but porting them should be rather trivial once you get to the point where you would consider porting them.
If you're using Windows, I'd suggest just using the AVRstudio from Atmel and WinAVR (GCC for AVR chips if you want to use C/C++ instead of just ASM). You can start with the Arduino development environment and move up later. Its free. The Arduino environment is really just a replacement for your main() with a while(1) loop on the standard AVR toolchain anyway
Arduino has lots of examples and information, but from a debugging standpoint, its the worst there is.
AVR Studio from Atmel has a nearly perfect simulator, and if you use something like HAPSIM you can simulate other hardware as well, such as serial ports, buttons, leds and a specific LCD.
If someone would add some decent debugging abilities to Arduino it'd be a useful development environment for me, but debugging through the simulator might be a little overwhelming for a newbie I guess.
I used to roll my own boards for ATmegas, now I just use Arduino boards, price is more than the processor, but cheaper than rolling the whole board yourself unless you do it in numbers, the Arduino hardware is the best way to go if you're talking quanities less than 10 for sure, probably cheaper all the way up to the 100s if you're hand assembling.
Re:Arduino - Links help (Score:2, Informative)
http://www.arduino.cc/ [arduino.cc]
Re: (Score:2)
Personally I prefer working with ATmega's directly rather than with Arduino, but ... if you want to futz around and LEARN, Arduino is a good place for it.
Yes. ATMega boards with small LCD displays are available [microcontrollershop.com], and Atmel's free AVR Studio is a reasonable IDE, with C and C++. If you already know how to program and don't want to join the Arduno cult, it's a reasonable way to get things done. There's a wide range of ATMega parts with different combinations of RAM, Flash, and I/O devices. AVR Studio sup
Re:Arduino (Score:4, Informative)
BBB [moderndevice.com] is much cheaper then the official arduino at any quantity if you don't need the USB after programming or shield compatibility. Same for the arduino pro [sparkfun.com], which is more expensive, but has shield compatibility and requires no assembly.
Seeeduino [seeedstudio.com] is slightly cheaper then the official version and has some cool hardware features missing from the original.
Your first one should probably still be the official arduino board, however. If you need a large quantity, you can save a bundle with the BBB or RBBB.
Comment removed (Score:4, Informative)
Make and Some 2600 (Score:2, Informative)
Re: (Score:2)
2600 you need to be careful with. A lot of the articles are pure BS.
Some choices (Score:2)
Make magazine obviously does the same at a more accesible level.
In the end Byte's value was that it provid
Nut's and Volt's (Score:2, Informative)
Bytes! Gazette (Score:2, Interesting)
Re: (Score:2, Informative)
Re:Compute's! Gazette (Score:2)
I remember Compute's! Gazette! And I remember not realizing that I needed the BASIC assembler at first myself:
AE 3D 10 00 23 11 7E 4D 8A
?SYNTAX ERROR
READY.
_
I feel like this is an "In my day...." post.
2600 (Score:2)
If you don't know of this quarterly magazine, look it up. It emphasizes the value of curiosity, while often providing templates for additional investigation. Some of the content is crap, but most of the time there's at least a few things of value.
Check it out [2600.com].
Re: (Score:2)
Yeah, I think you'd be better served going through old issues of Phrack than wasting your time with 2600's technical articles. The stuff in Phrack is dated, but at least it's real. And the letters page is way more entertaining than 2600's feeble attempt to copy it.
http://www.phrack.com/ [phrack.com]
Linux Journal? (Score:2)
There certainly isn't anything remotely close to those old magazines. I remember devouring issue after issue of Ahoy! (!) Remember having to run your code through the checker to make sure you typed in each line right?
These days, about the only thing I can really think of that has code in it and projects like that is Linux Journal. Sure, Make has some things in it, but it's definitely not focused solely on computers. The one area that remains extremely accessible for a beginner and also has a very high
The short answer (Score:2)
No, there isn't a comparable magazine these days.
My recomendation (Score:2)
Elektor (Score:2)
CNET.com? (Score:2)
Re: (Score:2)
Sure except CNET sounds like a rather poor choice. It's more of buyer's catalogue than a news site, and more of news site than a magazine for hobbyists. You won't find tutorials on new programming languages there, no objective (negative) reviews of new technologies, no instructables on tinkering and hacking.
Sure it shouldn't have to be paper, but it should be the kind of content paper had...
Re: (Score:3, Interesting)
Linux magazines (Score:2, Interesting)
Re: (Score:2)
If you are new to Linux I don't think I can recommend another magazine as highly as Linux Format, but if you are an advanced coder it might not be that interesting to you. Though I do like one of the projects from one of the authors of it, its called MikeOS, it is an OS entirely coded in
Creative Computing Mag was just as important! (Score:2, Interesting)
makezine? (Score:2)
How to program a person. [makezine.com]
How to scavenge a CD drive for parts. [makezine.com]
Arduino accelerometer. [makezine.com]
Electronics enclosure. [makezine.com]
But I'm probably way off, since it sounds like you're looking for software projects, not hardware.
Re: (Score:2)
Saying internet is not enough guys (Score:2)
2 good ones (Score:2)
Make, as already mentioned
Nuts and Volts
That would make a good subscription set. :)
byte archive? (Score:2)
Slightly OT, but was wondering if there was a good BYTE archive online? I've found various sources for other magazines (gazette, transactor, etc.), but nothing for byte. I've got 5-6 complete years of byte that could be a good starter if someone were doing it.
Anyone know what kind of copyright hassles some of these archives are getting? Are people getting permission, or are they relying on these publications being out-of-print and out-of-mind? I doubt there's much commercial potential left, for example.
Re: (Score:2)
Yeah, I've got that. Not a bad computing history overview, if slightly self congratulatory at times. Also let down a little by the printing quality. But overall I would recommend it.
Bona Fide OS Developer (Score:2)
This is a good hobbyist site for banging on the PC hardware. www.osdever.net/ [osdever.net]
Manufacturer websites (Score:5, Informative)
I grew up in the '80s on a steady diet of Byte and Compute! magazines, banging in page after page of code line-by-line, and figuring out how sound, graphics and input devices worked along the way.
They only existed in the 80s because the device manufacturers had no way to distribute large multi page paper documents for free. Sure, if you were a Genuine Degreed BS-EE with the job title to match, salesdroids would pretty much send you anything you ask for as samples. The general public, believe it or not, was expected to actually pay for printed appnotes and even printed datasheets.
Nowadays, if you want to learn how to make sound, or program a LCD, or run a A/D converter, you just download the appnotes from the manufacturers website, typically you get a PDF explaining in great detail how it works, schematics, and example code to get you started out. Some manufacturers go further and sell demoboards for a really modest (probably subsidized) fees.
Either the manufacturer's appnotes are so simple and clear that a "D" student could figure it out, or they go out of business and are replaced by a manufacturer with better tech writers. The quality level is generally excellent.
The modern hacker resource (Score:3, Funny)
Outsourcing Magazine [outsourcemagazine.co.uk]
hackaday.com (Score:2, Interesting)
Just f***ing Google it (Score:2)
Google
http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=write+your+own+assembler
Servo Magazine (Score:2)
Linux Journal (Score:2)
A lot of similarities still exist within Linux Journal.
c't (.de) (Score:2, Informative)
Magazines (Score:3, Insightful)
In the U.S. there are three general electronics magazines:
Circuit Cellar
Nuts & Volts
Elektor
Of these, Circuit Cellar is the more advanced and covers topics that are probably over the head of most beginners, but it's still worth a read in any case.
Elektor will be familiar to European readers as it's been published in multiple language versions over there for decades. The U.S. edition dates from the beginning of 2009 and contains the same editorial content as the UK edition. The construction articles in Elektor are quite well done and are look very professional. Elektor recently bought Circuit Cellar, but haven't changed the focus of that magazine (yet). Whether they do in the future remains to be seen.
Nuts & Volts is geared more toward hobbyists and beginners, but it's still good for all levels (at least some of it). It has several long-running columns devoted to the Arduino, the PICAXE, and (starting recently) the Parallax Propeller.
Another good option is Everyday Practical Electronics, which is published in the UK and sold by major U.S. chain bookstores.
Although not strictly devoted to electronics, Servo Magazine (published by the same people who publish Nuts & Volts) does cover the electronics aspects of robotics. There is some overlap with Nuts & Volts, but not a lot.
Dr. Dobbs (Score:3, Interesting)
Re: (Score:2)
http://lmgtfy.com/?q=%22reading+comprehension%22 [lmgtfy.com]
He didn't ask how to write his own assembler.
He asked where to find a good, consistent source of articles about that kind of problems.
Re: (Score:2)
He asked where to find a good, consistent source of articles about that kind of problems.
So lmgtfy is wrong in what manner? Google will do it.
Instructables.com is the only other "search" site you need.
I will concede the point that one thing google is iffy at best is finding the stereotypical electronics manufacturer appnote. Then again, how hard is it to figure out, if you want to do something with PICs, you go to microchip.com, click app notes, and do the obvious searchy searchy thing for what you want to do?
Re: (Score:2)
...and if you look for news what interesting developments are there in microcontrollers? If you want to know what programming languages are "in"? Compare assemblers of PIC, '51, AVR and ARM (not instruction-by-instruction but in a subjective/descriptive way like an article does)? Learn about new algorithmic techniques in reading accelerometer data? Get news about a new manufacturer with microcontrollers of a completely different family?
You are suggesting a source of data. The question is not about data, it'
Re: (Score:2)
Okay, so what is the correct query for Google to tell me what is there interesting and worthwhile to learn about embedded currently?
You're not getting the difference between obtaining answer for a question and reaching out for knowledge.
Re: (Score:2)
Thats just horrible advice. Most 'free code' is absolute crap with little to no commenting and even less information on why it does what it does or even WHAT its supposed to do.
Old computer rags actually explained it, which is why you learn.
Reverse engineering takes skill and domain specific knowledge which you don't get when you're starting out.